How to disable 3 LED strips for ALPHAREX 2005-2011 Toyota Tacoma Headlights
THIS GUIDE IS FOR​
Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
INSTALLATION TOOLS
Phillips Screwdriver
ALPHAREX PRO-Series, LUXX-Series and NOVA-Series headlights for 2005-11 Toyota Tacoma come with 3 LED strips on the headlights by default.
Customers can choose to enable or disable these 3 LED strips based on their preference.
For customers who want to keep the 3 LED strips, nothing need to be done.
For customers that don’t want the 3 LED strips, please follow the following steps.
OPEN THE HEADLIGHT’S CIRCUIT BOARD
Unscrew the 3 Phillips screws on the bottom of the headlight.
UNPLUG 2 PIN CONNECTOR
With the circuit board expose, unplug the 2 pin connector (RED and BLACK wires) and leave it unplug.
COMPLETE STEPS TO DISABLE 3 LED STRIPS
Reinstall the circuit board back onto the headlight by installing the 4 Phillips screws.
Repeat the steps for the other side of the headlight.
