How to disable 3 LED strips for AlphaRex 2005-2011 Toyota Tacoma Headlights

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

Some vehicle require the DRL harness installed for the headlight to function properly. Here’s a list of certain model with require the DRL to be install.


Our 2005-2011 Toyota Tacoma PRO-Series, LUXX-Series and NOVA-Series headlights come with 3 LED strip on the headlights by default, customers can choose to enable or disable these 3 LED strips based on their preference, and here is the step-by-step instruction.

2005 2006 2007 2008 2009 2010 2011 Toyota Tacoma NOVA-Series Projector Headlights
05-11 Toyota Tacoma headlights with 3 LED strips
2005 2006 2007 2008 2009 2010 2011 Toyota Tacoma NOVA-Series Projector Headlights
05-11 Toyota Tacoma headlights without 3 LED strips

Instruction:

For people who want to keep the 3 strips, nothing need to be done. For people that don’t want the 3 strips, please follow the steps below:

1. Unscrew the 4 Philip screws on the bottom of the headlight
2. With the circuit board expose, unplug the 2 pin connector ( red and black wires ) and leave it unplug
3. Reinstall the circuit board back onto the headlight by installing the 4 Philip screws
4. Repeat the steps for the other side

Unscrew the 4 Philip screws on the bottom of the headlight
Unplug the 2 pin connector ( red and black wires ) and leave it unplug
2005 2006 2007 2008 2009 2010 2011 Toyota Tacoma NOVA-Series Projector Headlights