Installation Guide for 05-07 Ford Super Duty PRO-Series LED Tail lights

img_slogan_242424

THIS GUIDE IS FOR​

ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrival innovative technology. The following installation guide we take you through the installation of your new ALPHAREX TAIL LIGHTS for your 05-07 Ford Super Duty step by step.

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

INSTALLATION TOOLS

1/4 Ratchet
Power Tool
Phillips Screwdriver
1/4 Extension
Socket
Size NEEDED
8mm

NOTE: Whenever using a power tool, please make sure do not overtighten the screws.

Whenever working on your vehicle
always make sure your vehicle is parked with the ignition off.

PART I - REMOVE TAIL LIGHTS

REMOVE TAIL LIGHTS BOLTS

Open the trunk gate and start by removing the tail light’s bolts.

Remove the top and bottom 10mm bolts from each side of the tail lights.

NOTE: Whenever using a power wrench, please make sure do not overtighten the bolts.

Gently remove the tail light by pulling outward.

UNPLUG SOCKETS AND REMOVE TAIL LIGHTS

Unplug the sockets before removing the tail lights.

REMOVE LIGHTBULBS FROM THE SOCKETS

Pull out the lightbulbs from each sockets and remove them before installation.

Repeat the steps for the other side to remove the tail lights completely.

PART II - INSTALL TAIL LIGHTS

PLUG THE SOCKETS AND INSTALL TAIL LIGHTS

ALPHAREX tail lights have the universal mounting bracket for the reverse light.

Depending on your vehicle model, you might need to remove the universal bracket for the reverse light plug install.

Plug the wire connectors into the sockets directly to the new ALPHAREX tail lights.

Twist and secure the socket into the new tail lights.

Reverse the removal process to install the new tail lights into the vehicle.

Use ratchet to tighten the 2 X 8mm bolts for each side.

NOTE: Whenever using a power wrench, please make sure do not overtighten the bolts.

COMPLETE INSTALLATION

Congratulations! you have completed the installation for ALPHAREX 05-07 Ford Super Duty PRO-Series LED tail lights.

[insta-gallery id="1"]
Shopping cart
Start typing to see products you are looking for.