Installation Guide for 07-13 Chevrolet Silverado Headlights
Warning: This installation article is a tutorial guide. By reading this article, you agree it is for reference and AlphaRex USA nor our distributors make any guarantee on any finished results, nor we held any responsibility for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, we highly recommend you seek help with professional mechanics to do the installation.
Tools Needed: 10mm socket clip remover, flat head screwdriver and pilers
Remove (8) plastic push clips
Remove (4) 10mm bolts
Use pliers to compress (4) metal clips and pull outwards to free the grill
There will be a total of (3) 10mm bolts holding the headlight. The 3rd bolt can be accessed through the fender liner or a 10mm with an extension
Remove the headlights by pulling outwards and remove headlight connector
Connect new headlights to truck and test all functions
With the DRL harness, you will can connect (+) to the terminal on the fuse box and (-) to any ground. Tap grey wire to fuse #48. For more information about wiring the DRL harness, please read our article about How to wire the DRL harness?
You will next aim the headlights at about 25ft against a wall on a level surface.