Article

Installation Guide for 09-14 FORD F-150 Headlights

img_slogan_242424

THIS GUIDE IS FORโ€‹

ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrival innovative technology. The following installation guide we take you through the installation of your new ALPHAREX HEADLIGHTS for your 2009-14 Ford F-150 step by step.

NOTE: Some vehicle require the DRL harness installed for the headlight to function properly.

Do NOT use dielectric or any type of weather sealing grease on connectors or sockets.
Doing so will result in connection problems and will not be covered under warranty. Please click HERE for further explanation.

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

INSTALLATION TOOLS

1/4 Ratchet
Metal Panel Popper
Phillips Screwdriver
Flat Screwdriver
1/4 Extension
Socket
Size NEEDED
10

PART I - REMOVE HEADLIGHTS

DISCONNECTING THE NEGATIVE BATTERY TERMINAL

Whenever working on your vehicle always start by disconnecting the negative battery terminal.

REMOVE THE PROTECTIVE COVER

Start by removing two push pins that are holding up the protective cover.

 

REMOVE THE HEADLIGHT BOLTS

In order to remove the headlight you will have to remove 3 X 10mm bolts.

Two bolts on the top and one bolt in the middle. Please follow the same steps for the other side.

 

REMOVE THE HEADLIGHTS

Pull the headlight assembly outwards to disengage the headlight from your truck.

Please follow the same steps for the other side.

REMOVE THE PLUGS AND TURN SIGNAL SOCKET

Disconnect all the indicated plugs and remove the side marker and turn signal socket.

 

 

TRANSFER THE SOCKETS TO THE NEW HEADLIGHTS

From each side of the headlight, remove the side marker bulb and attach to the new ALPHAREX headlight side marker connection.

 

Attach one end of the turn signal split connection to the new headlight turn signal socket.
Please follow the same steps for the other headlight.

Once you have transferred the sockets to the new ALPHAREX headlights should now look like this.

 

PART II - INSTALL HEADLIGHTS

TAP THE FUSE AND ROUTE THE WIRE HARNESS

To ensure proper functionality of the new ALPHAREX Headlights, it is essential to install the appropriate wire harness(es).

FOR PRO-SERIES: It is essential to tap the fuse and install both the DRL and the Low/High Beam wire harnesses.

FOR LUXX and NOVA-SERIES: You only need to tap the fuse and install the DRL wire harness.

FOR PRO-SERIES | LUXX-SERIES | NOVA-SERIES OWNERS

Begin by installing the DRL wire harness. Ground the black wire to the negative battery terminal first. Next, connect the red wire to the positive battery terminal.

Find the fuse box and open its cover to access and tap into the fuse.

FOR PRO-SERIES | LUXX-SERIES | NOVA-SERIES OWNERS

Locate Fuse #76, remove and then tap into the fuse box.

After closing the fuse box cover, proceed to route the DRL harness wire towards the driver side of the headlight location.

 

FOR PRO-SERIES OWNERS ONLY
Now letโ€™s install the Low/High Beam wire harness. Begin by grounding the black wire to the negative battery terminal and connecting the red wire to the positive battery terminal.

 

Once the wire harness is connected to the battery, route it towards the driver side of the headlight location.

ย 

After completing the routing of the appropriate wire harness(es), you will be prepared to install the new ALPHAREX headlights.

PLUG THE HEADLIGHTS

Start by connecting all of the light sockets into the headlight assembly.
DO NOT USE DIELECTRIC GREASE!

Verify that all the sockets are securely connected to the new headlights before proceeding with the installation into the vehicle. Please follow the same process for the other side of the headlight.

 

INSTALL THE HEADLIGHTS

To finalize the installation of the headlights into the vehicle, please reverse the process used for removing the headlights.

TEST THE HEADLIGHT FUNCTIONS

Test the functions of your ALPHAREX headlights to ensure everything works properly.

ADJUST HEADLIGHT LEVEL

Once everything has been tested aim your ALPHAREX headlights by parking 25ft from a wall and level the headlight evenly.

Turn clockwise: to lower the light
Turn counterclockwise: to raise the light

 

COMPLETE INSTALLATION

Congratulations! you have completed the installation for ALPHAREX 09-14 Ford F-150 Headlights.

Start typing to see products you are looking for.