Installation Guide for 09-14 Ford F150 Headlights
Warning: This installation article is a tutorial guide. By reading this article, you agree it is for reference and AlphaRex USA nor our distributors make any guarantee on any finished results, nor we held any responsibility for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, we highly recommend you seek help with professional mechanics to do the installation.
Tools Needed: 10mm socket clip remover or flat head screwdriver
Remove (2) push pins holding up the protective cover.
Remove (3) 10MM bolts
Pull headlight assembly outwards to disengage the headlight from your truck
Disconnect all the indicated plugs, and remove side marker and turn signal socket
Remove side marker bulb, and attach to the new side marker connection
Attach one end of the turn signal split connection to the turn signal socket
Your Pro Series headlights should now look like this
Reconnect all sockets back to your truck. If you are planning to install the optional DRL harness, connect the red wire from the DRL harness (short end to passenger side, long end to driver side) For more information about wiring the DRL harness, please read our article about How to wire the DRL harness?
Connect (+) and (-) from the DRL harness to the battery. For more information about wiring the DRL harness, please read our article about How to wire the DRL harness?
Tap grey wire from harness to fuse F76. For more information about wiring the DRL harness, please read our article about How to wire the DRL harness?
Mount and secure headlights to vehicle and test all functions.
You will next aim the headlights at about 25ft against a wall on a level surface.