Article

Installation Guide for 21-23 Toyota GR86 | Subaru BRZ LED Tail Lights

img_slogan_242424

THIS GUIDE IS FORโ€‹

ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrival innovative technology. The following installation guide we take you through the installation of your new ALPHAREX TAIL LIGHTS for your 21-23 Toyota GR86 / Subaru BRZ step by step.

Do NOT use dielectric or any type of weather sealing grease on connectors or sockets.
Doing so will result in connection problems and will not be covered under warranty. Please click HERE for further explanation.

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

INSTALLATION TOOLS

1/4 Ratchet
Power Tool
Metal Panel Popper
Phillips Screwdriver
1/4 Extension
Socket
Size NEEDED
10

NOTE: Whenever using a power tool, please make sure do not overtighten the screws.

Whenever working on your vehicle
always make sure your vehicle is parked with the ignition off.

PART I - REMOVE TAIL LIGHTS

REMOVE THE BOLTS

Whenever working on your vehicle always make sure your vehicle is OFF and parked.
Open the trunk and start by removing the tail lightโ€™s bolts.

To detach the tail light, begin by raising the plastic guard cover.
Loosen the 3 X 10mm bolts by turning them counterclockwise.

Carefully pull the tail light assembly outward towards you to remove it from its position.

Remove the tail light by disconnecting the plug socket.

Please follow the same procedure for the opposite side of the tail light.

TRANSFER THE BRACKET

Position the stock tail lights on the work table and Initiate the process by loosening the bracket screws.

Utilize the previously removed bracket to transfer and securely install it onto the new ALPHAREX tail light.
Kindly replicate the identical steps for the opposite side of the tail light.

TURN SIGNAL LIGHTING STYLE

Prior to installing the new ALPHAREX tail lights, you have the option to select the desired turn signal lighting style.

Please note that whichever choice you opt for, ensure to apply the same selection to both tail lights to maintain consistent lighting.

If Green connectors are unplugged: the lighting style will be Sequential only.

If Green connectors are connected: the lighting style will be Blinking only.

PART II - INSTALL TAIL LIGHTS

INSTALL THE TAIL LIGHTS

Connect the light socket into the tail light assembly, taking care not to disrupt the wire placement that could affect proper installation.

To finish the installation, follow the reverse procedure of the removal process.

COMPLETE INSTALLATION

Congratulations! you have completed the installation for ALPHAREX 21-23 Toyota GR86 / Subaru BRZ LED Tail Lights.

(Pictures shown with optional Toyota GR86 / BRZ ALPHAREX TRUNK LED LIGHT BAR)

 

 

Start typing to see products you are looking for.